Customer Satisfaction

RPG Electronics, Inc. is a well-established business with 25 years of a strong commitment to quality test equipment and customer satisfaction. Our goal is to be the best in the industry. Therefore, meeting customer needs is our primary goal.

Our experienced staff is constantly improving on our customer satisfaction by offering a fast turn-around on technical support and offering a full line of training options in the use of our LCD Testing Equipment. We always appreciate feedback on ways to make our test equipment more user-friendly to the purchaser.

Providing quality LCD Test Equipment and Pure Customer Satisfaction is our Goal

Download Model 3200-01

PDF Manuals for Model 3200-01:
Download English Manual
Download Chinese Manual

Ordering Information

RPG accepts orders via FAX and Email. Click here for full ordering details.
Model 3200-01 Multiplexed Liquid Crystal Tester PDF  | Print |  E-mail
Written by iTechDevelopers   
Monday, 10 November 2008 11:20

 


Model 3200 LCD Tester
Click to enlarge


Overview

The Model 3200-01 LCD Tester has the ability to test both direct-drive and multiplexed (up to 32 backplanes) displays. By using an equivalent rms, 50% duty cycle waveform, multiplexed displays can be tested for functionalism, current consumption and contrast without having to resort to complex waveforms. Simply programming the appropriate rms voltage will allow complete excercising of the multiplexed display for testing purposes. Fifty tests per second, along with automatic limit detection provides for fast testing-throughput with minimum operator instruction.

 

 

Features

Model 3200-01 Product Features:

  • Tests both direct and multiplexed displays with up to 32 backplanes
  • 1uA to 3000uA in 5 ranges
  • .2 to 16V program capability
  • Automatic GO/NO-GO or Manual testing modes
  • Four programmable voltage levels
  • Operating frequencies from 25 to 2500Hz can be selected
  • Digital display of current and voltage readings
  • Shorts detected between backplanes, segments, and between backplanes and segments
  • High speed: 50 tests/second
  • Static (leakage) and dynamic (total curr.) measurements can be easily selected
  • No DC voltages which can damage LCD
  • Two ON/OFF freqs. for checking response times
  • All alum. chassis for ruggedness and durability

Spec's

Specifications:

  • Power: 110V or 220VAC, 50/60Hz, 12W.
  • Dimensions: (LxWxH) 14.5" (36.9 cm), 8.25" (21 cm), 6.5" (16.5 cm), 9.25 lbs. (4.2 kg.)

Voltages

Voltages:

  • Range: .2V to 16V, 50% duty cycle, continuously variable with digital readout.
  • Accuracy: +/-2% of setting +/-10mv

Settings:

  1. Vo: OFF Voltage for Mux. displays
  2. V1: Low Voltage setting
  3. V2: Normal Voltage setting
  4. V3: High Voltage setting

Configurations

Drive Configurations:

  • Backplanes: 32 standard
  • Resolution: .001, .01, 1, 10uA respectively
  • ACC.: +/-2% of setting, +/-10 uA

Current

Current Measurement

  • Range: 1, 10, 100, 1000, 3000uA
  • Resolution: .001, 01, .1, 1, 10uA
  • ACC.: +/-2% of setting, +/-10nA

Frequency

Frequency:

  • Range: 25 to 250Hz with 5Hz graduations. -- 150 to 2500Hz with 25Hz graduations
  • Programming ACC.: +/-5% of setting - BNC on rear

On/Off Cycling of Display:

  • Freq. 1 and 4Hz
  • ACC.: +/-5%, sync signal at BNC on rear panel

Limit Set

Limit Set:

  • Limit sets are pot. adjustable from 0 to full current range and displayed by DPM
    • Full-display current limit at V2 and V3
    • Segment-current-limit at V2

Test Modes

Test Modes:

  • Static: Measures the leakage component
  • Dynamic: Measures total current (leakage + capacitive)

Delay

Delay:

  • Total display current can be delayed up to 10 sec. if visual verification is desired

Warranty

Warranty:

  • 1 full year parts and labor
Last Updated ( Monday, 12 July 2010 20:47 )
 

Calibration Service & Pricing

We recommend calibration of the tester every year. This can be done following the calibration instructions included in the operations manual.

  • Model 3200: $75.00
  • Model 4200: $125.00

Calibration pricing does not including shipping. A calibration certificate will be provided as well as new calibration reminder stickers.

Technical Support

Technical Support is always available to answer any questions regarding the use and operation of the tester. Just contact RPG Electronics, Inc.:

By Phone: (530) 878-0470
By Email: Click here